Get FREE shipping on orders over $100
You are now leaving Lorex.com. Would you like to continue to Lorex’s For Business website?
Get FREE shipping on orders over $100
The ECP-01 Series are high-speed, long-distance Ethernet & PoE extenders that enable the transmission of Ethernet signals and PoE up to 400m through coaxial cables in various situations. They offer a cost-effective and time-saving solution for migrating existing analog systems to IP-based systems, as the ECP-01 series supports easy installation utilizing existing coaxial cables. With the long-distance transmission feature, these devices easily overcome the 100-meter distance limitation and significantly reduce construction costs compared to fiber optic configurations.
*Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
Model | ECP-01T | ECP-01R | |
---|---|---|---|
Interface | |||
Coax | 1 x 75Ω BNC (Female) - Ethernet over Coax (B-LinX |
||
Ethernet | 1 x RJ45 - 100 Base-T | ||
Transmission Rate | 100Mbps Full Duplex (100Mbps between Intercoax devices) |
||
Transmission Distance | |||
Ethernet | up to 400 m when 100Mbps is used up to 1000 m when 10Mbps is used (5C-HFBT, RG-59 or better) |
||
PoE (PoC) | Up to 400meter (RG-59, RG-6) | ||
LED Indication | Ethernet | 1 x Link (Yellow) / 1 x ACT (Green) | |
Power | |||
Input | B-Linx or DC48V~57V | PoE Switch or DC48V~57V | |
PoE Output | IEEE802.3af (PoE), IEEE802.3at (PoE+), Extra PoE up to 60W with 57V Power Adaptor |
PoE Not Supported PoC Only |
Model | ECP-01T | ECP-01R | |
---|---|---|---|
Mechanical | |||
Dimension | 83(L) x 51(W) x 24(H)mm | ||
Weight | 52g | ||
Environment | |||
Operating Temp | -20 ~ 60°C | ||
Storage Temp | -30 ~ 80°C | ||
Relative Humidity | 10% ~ 90% | ||
Compliance | |||
Certification | FCC, CE, KC, RoHS | ||
Surge Protection | IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us) |
ECP-01T
(Transmitter)
ECP-01R
(Receiver)
Manual
ALP-ECP-01T/R - Single Port Ethernet over Coax Transmitter / Receiver